Brands / Senninger
End Spray
About this family
The Senninger® low pressure End Spray is designed for distribution at the end of a machine. It can help irrigate the area between the last sprinkler and the end gun. The low angle design resists the effects of wind and the large orifice resists clogging.
Rigid mount is recommended for the End Spray. Use a 1" NPT galvanized 45-degree elbow (not included). Orient pad of End Spray nozzle to face up.
Features
- Provides a uniform 180º distribution pattern over a large area to help reduce compaction and run-off
End Spray Design Criteria
| End Spray | |
|---|---|
| Nozzle Sizes: Minimum | #20 5/16" (7.94 mm) |
| Nozzle Sizes: Maximum | #38 19/32" (15.08 mm) |
| Flows: Minimum | 8.1 gpm (1840 L/hr) |
| Flows: Maximum | 48.9 gpm (11106 L/hr) |
| Average Radius at 7 - 12 ft (2.13 - 3.66 m) | 25 - 29 ft (7.6 - 8.8 m) |
| Pressure at the Nozzle: Minimum | 10 psi (0.69 bar) |
| Pressure at the Nozzle: Maximum | 25 psi (1.72 bar) |
End Spray nozzles
Nozzle with O-ring
- #20
- #26
- #32
- #38



