Senninger / Wobbler Sprinklers

Senninger Xcel-Wobbler – 3/4" M NPT product photo

XWOBxxB3HALD

Xcel-Wobbler – 3/4" M NPT

3/4" M NPT, high-angle, black deflector, select #6 - 14 nozzle (complete)

About the Xcel-Wobbler

The Xcel-Wobbler™ provides instantaneous coverage over a large area. It distributes water in an extremely uniform pattern that resists wind-drift and evaporation.

Which Wobbler® is best for you? Wobbler sprinklers distribute water in an instantaneous, uniform application pattern over a large area. Their low operating pressures and larger droplet sizes result in very low evaporative loss and greater irrigation efficiency.

Features

  • Counter-balance design reduces vibration for smooth, stable performance with minimal riser support
  • Only one moving part, which translates to longer product life
  • Ideal for frost protection, salt leaching and germination
  • Low operating pressures of 10 to 25 psi (0.69 bar to 1.72 bar) save energy and money

Xcel-Wobbler Design Criteria

Xcel-Wobbler™ (High Angle)Xcel-Wobbler™ (Mid Angle)
Nozzle sizes: Minimum#6 3/32" (2.38 mm)#6 3/32" (2.38 mm)
Nozzle sizes: Maximum#14 7/32" (5.56 mm)#14 7/32" (5.56 mm)
Flows: Minimum0.78 gpm (177 L/hr)0.78 gpm (177 L/hr)
Flows: Maximum6.97 gpm (1583 L/hr)6.97 gpm (1583 L/hr)
Pressure Range: Minimum10 psi (0.69 bar)10 psi (0.69 bar)
Pressure Range: Maximum25 psi (1.72 bar)25 psi (1.72 bar)
Diameters at 1.5 ft (0.46 m): Minimum36.5 ft (11.1 m)32 ft (9.8 m)
Diameters at 1.5 ft (0.46 m): Maximum55.5 ft (16.9 m)46.5 ft (14.2 m)
Diameters at 3 ft (0.91 m): Minimum39 ft (11.8 m)34 ft (10.3 m)
Diameters at 3 ft (0.91 m): Maximum57 ft (17.4 m)54 ft (16.5 m)
Pattern Spacing: MaximumUp to 30 ft (9.1 m)Up to 25 ft (7.6 m)

Stream heights range from 2.5 to 5.5 ft (0.8 to 1.7 m) above the nozzle based on pressure and nozzle size. Minimum recommended riser height is 1.5 ft (0.46 m).

Wobbler Design Criteria (comparison)

*mini-Wobbler™Xcel-Wobbler™ (High Angle)Xcel-Wobbler™ (Mid Angle)**Wobbler® (Standard Angle)**Wobbler® (Low Angle)
Nozzle sizes: Minimum#4 1/16" (1.59 mm)#6 3/32" (2.38 mm)#6 3/32" (2.38 mm)#6 3/32" (2.38 mm)#6 3/32" (2.38 mm)
Nozzle sizes: Maximum#8 1/8" (3.18 mm)#14 7/32" (5.56 mm)#14 7/32" (5.56 mm)#14 7/32" (5.56 mm)#14 7/32" (5.56 mm)
Flow Range: Minimum0.42 gpm (95 L/hr)0.78 gpm (177 L/hr)0.78 gpm (177 L/hr)0.78 gpm (177 L/hr)0.78 gpm (177 L/hr)
Flow Range: Maximum2.18 gpm (495 L/hr)6.97 gpm (1583 L/hr)6.97 gpm (1583 L/hr)7.64 gpm (1735 L/hr)7.64 gpm (1735 L/hr)
Pressure Range: Maximum15 - 25 psi (1.03 - 1.72 bar)10 - 25 psi (0.69 - 1.72 bar)10 - 25 psi (0.69 - 1.72 bar)10 - 30 psi (0.69 - 2.07 bar)10 - 30 psi (0.69 - 2.07 bar)
Spacing Recommendation: Minimum10 ft (3 m)10 ft (3 m)10 ft (3 m)10 ft (3 m)10 ft (3 m)
Diameter of Throw: Minimum at 1.5 ft (0.46 m) ht26.5 ft (8.1 m)36.5 ft (11.1 m)32 ft (9.8 m)34 ft (10.4 m)29 ft (8.8 m)
Diameter of Throw: Maximum at 1.5 ft (0.46 m) ht39 ft (11.9 m)55.5 ft (16.9 m)46.5 ft (14.2 m)52.0 ft (15.9 m)46.5 ft (14.2 m)
Diameter of Throw: Minimum at 3 ft (0.92 m) ht31 ft (9.5 m)39 ft (11.8 m)34 ft (10.3 m)38 ft (11.6 m)33 ft (10 m)
Diameter of Throw: Maximum at 3 ft (0.92 m) ht43.5 ft (13.3 m)57 ft (17.4 m)54 ft (16.5 m)56 ft (17 m)52 ft (15.8 m)
Stream height above nozzle***: Minimum1.5 ft (0.46 m)2.5 ft (0.8 m)2.5 ft (0.8 m)2.5 ft (0.8 m)2.5 ft (0.8 m)
Stream height above nozzle***: Maximum3 ft (0.91 m)5.5 ft (1.7 m)4 ft (1.2 m)5.5 ft (1.7 m)4 ft (1.2 m)
Connections1/2" M NPT1/2" M NPT, 3/4" M NPT1/2" M NPT, 3/4" M NPT1/2" M NPT, 3/4" M NPT1/2" M NPT, 3/4" M NPT

* Inverted and High-Angle mini-Wobbler also available.

** These standard Wobbler sprinklers require more stabilaztion when mounted onto risers.

*** Stream heights vary based on pressure and nozzle size selection.

Gallery

  • Senninger Xcel-Wobbler sprinkler

Other models in this family

Model numberDescriptionBox qtyBox wt
XWOBxxB2HALD1/2" M NPT, high-angle, black deflector, select #6 - 14 nozzle (complete)10013 lb
XWOBxxB2MA1/2" M NPT, mid-angle, white deflector, select #6 - 14 nozzle (complete)10013 lb
XWOBxxB3MA3/4" M NPT, mid-angle, white deflector, select #6 - 14 nozzle (complete)10013 lb

Details

3/4" M NPT, high-angle, black deflector, select #6 - 14 nozzle (complete) Add the nozzle number to replace xx for the complete part number. For example: XWOB12B3HALD is an Xcel-Wobbler with a number 12 nozzle and a 3/4" base high-angle model.

Specs

Flow0.78 - 6.97 gpm
Anglehigh-angle
Inlet3/4" M NPT
Pressure10 - 25 psi
Connection3/4" M NPT
ApplicationSolid Set, Nursery & Greenhouse
Connections3/4" M NPT
Nozzle sizes#6 - #14
Box qty100
Deflector colorblack
Includes nozzleYes
Box weight (lb)13
Family flow range (gpm)0.78 - 6.97
Family nozzle sizes#6 - #14
Family pressure range (psi)10 - 25

Documents

No documents are attached to this SKU yet.

Also in this category